The Nox-Crete Perfect Sprayer is engineered for consistent, trouble-free application of concrete form release agents, bondbreakers, curing compounds, floor sealers, densifiers and other construction chemicals. The success of your concrete project often depends on proper application—and with the Perfect Sprayer, achieving uniform coverage is simple and reliable.
This professional-grade sprayer can be hand-pumped or pressurized with an external air source up to 116 psi (8 bar / 800 kPa). It features a heavy-duty, hammer-finished 3.4-gallon (12.9 L) tank, stainless steel wand, and ergonomic pistol grip for comfort and long-term durability in demanding jobsite conditions.
Additional features include an in-line 100-mesh filter, built-in air pressure gauge, a 5-ft chemically resistant hose that remains flexible in freezing temperatures, a wide funnel-style opening to minimize spills, and backpack-style straps for convenient hands-free operation.
*Note: Not recommended for use with application of Low-VOC, solvent-based bondbreakers, cure and seals or decorative sealers.
Features
- 3.4 gal. (12.9L) Tank with 2.75 gal (10.4L) fill capacity
- Heavy-duty stainless steel tank with an external hammered coating finish that resists corrosion and chemical degradation
- Built-In pressure gauge for monitoring tank pressure
- Maximum pressure of 116psi (8 bar / 800 kpa)
- Can be pressurized using hand pump or air compressor fill valve
- Tank equipped with pressure relief valve to prevent overcharging
- Includes 5ft. (152cm) of chemical resistant hose that remains flexible even in below freezing conditions
- Utilizes a heavy-duty, pistol grip shut-off that is designed for comfort and long-term durability under extreme conditions
- Incorporates a heavy-duty stainless steel wand made from pipe that won’t bend like traditional spray wands made from brass or plastic tube
- Swivel fitting from hose to shut-off
Optional Equipment Available
- Extra spray tips in various sizes ranging from 0.67-1.0 GPM
- Pressure Regulator
- 40psi pressure-regulating non-dripping control flow valve
- 50 mesh filter for larger optional tip sizes
Sprayer Tips
Using the right sprayer tip is important to ensure quality results. Refer to the Spray Tip Recommendation Guide (Included with your sprayer, also available under Resource Downloads on this page) before use as best practice.
Maintenance
Empty the contents of the sprayer and clean with the appropriate cleaning solutions (refer to Recommended Nox-Crete Cleaning Products included with sprayer and under Resource Downloads on this page) because this will keep your sprayer in proper working condition. Leave the lid loose to allow the empty tank to air dry. In the event that the filter becomes plugged, remove the filter and wash out with appropriate solvent.
– Contact us at 1-800-669-2738 for accessory parts
Please note: The Nox-Crete Perfect Sprayer is specially designed for use with Nox-Crete products only.
